Resource icon

Photo Tutorial Helms Wreath Decoration

Author's Note
Our projects were very popular during the lifetime of our business and we wanted to ensure they continued to provide inspiration for chain maillers whatever their experience. It's a pleasure to see they will live on with Chainmaillers.com
-Sarah Austin

Helms Wreath Decoration

Make this chain maille wreath in helms weave using square profile jump rings. The finished Helms Wreath measures 5cm in diameter and could be used as a pendant, in Christmas cards or as a decoration.

1613672585247.png


Materials

You will need:
  • 23 green anodised aluminium saw cut jump rings, ID 10.2mm, WD 1.6mm (A)
  • 25 red square profile anodised aluminium saw cut jump rings, ID 5mm, WD 1.2mm (B)
  • 5 gold anodised aluminium saw cut jump rings, ID 6.7mm, WD 1.2mm (C)
  • 2 gold anodised aluminium saw cut jump rings, ID 6.8mm, WD 1.6mm (D)
  • 2 gold anodised aluminium saw cut jump rings, ID 8.3mm, WD 1.6mm (E)
Tools:
  • two pairs of smooth faced chain nose, bent nose or flat nose pliers

Instructions

Important Note: To make the helms weave stiff it needs to be made with THREE red square profile rings (see main picture). The instructions below show it made with only two red square rings.
  1. Close sixteen green rings (A). Link one red ring (B) to two closed green rings (A) – this ring (B) is the starter ring.

  2. Link one red ring (B) to two more closed green rings (A) and the green rings added in the previous step. Add a second and third red ring (B) - the third ring is not shown in the picture.
    1613672631426.png


  3. Fold back the top green ring (A), which is attached on only one side.
    1613672642591.png


  4. Weave one open green ring (A) between the first pair of green rings so that you encircle the three red rings (B). Close the green ring (A).
    1613672653455.png


  5. Return the folded back ring over the green ring (A) just added.
    1613672663342.png


  6. Using three red rings (B), link two more closed green rings (A) to the last rings in your helms weave.
    1613672673846.png


  7. Repeat steps 3-5 to add the centre ring that encircles the three red rings.
    1613672685604.png


  8. Continue making a helms weave chain until you have a chain that has seven sets of three red rings (B)

    Remove the red starter ring and join the two chain ends with three gold rings (C) - the third ring is not shown in the picture.
    1613672696397.png


  9. Link two large gold rings (E) through the three gold rings (C) with which you joined the helms chain in step 8. Position the two new gold rings on either side.

    Link two medium gold rings (D) through the three gold rings (C) from step 8 so that they lie on top of the gold rings (E) just added.

    Link two gold rings (C) through the three gold rings (C) from step 8 so that they lie on top of the gold rings (D) just added.
    1613672708200.png


  10. To complete the bow effect, link three red rings (B) through the gold rings (C) from step 8.
    1613672718706.png

If you found this tutorial helpful: Please let other users know, leave a rating.

©2021 Sarah Austin. All rights reserved.
Author
Beadsisters
Views
1,405
First release
Last update
Rating
0.00 star(s) 0 ratings

More resources from Beadsisters

Top